User manual

Install PC software &

USB driver

1. Put the disk in the disk drive. Following

dialogue box will appear automatically. Please

execute the “autorun.exe” if it does not appear.

2. Button explanations

• WINDOWS7_VISTA: install pc software for

WINDOWS7 with VISTA.

Directory setting for VISTA.

Following window will comes up

automatically, when click the button

“WINDOWS7_VISTA_XP_2000”.

• INSTALL USB driver (for WINDOWS_

VISTA _XP_2000): Please refer to the

METER and USB DRIVER’S

• WINDOWS_VISTA_XP_2000: Install pc

software for WINDOWS VISTA XP 2000

• Instruction Manual: Operation instruction

manual.

• EXIT: Exit install program.

For WINDOWS VISTA_XP

_2000 and USB Driver’s

Installation

1. Connect meter to PC with USB cable. Following

dialogue box will appear automatically. Please

select “Install USB [for WINDOWS_VISTA_

XP_2000“to install.

2. Installation.

SET CONNECTION PORT

1. StartÆControl PanelÆPerformance and

Maintenance.

2. Select “System”.

3. Select “Hardware” ÆDevice Manager.

PAGE 1
Install PC software & USB driver For WINDOWS VISTA_XP _2000 and USB Driver’s Installation 1. Put the disk in the disk drive. Following dialogue box will appear automatically. Please execute the “autorun.exe” if it does not appear. 1. StartÆControl PanelÆPerformance and Maintenance. 1. Connect meter to PC with USB cable. Following dialogue box will appear automatically. Please select “Install USB [for WINDOWS_VISTA_ XP_2000“to install.
PAGE 2
4. In this window, you see the number of the port selected by system auto manically. You can change it. Please write down the port number, it will be needed for manual connection. SOFTWARE OPERATION Com-Port Setup The user can setup the Com-Port parameter in this form. Initial Setup On the Virtual Meter Main Form please click the Menu Bar->File->Initial Setup. Value Set There are symmetrical, dissymmetrical, and direct inputs Hi/Lo Limits. The Go/No Go will be the basis of the three modes.
PAGE 3
List Frequency Distribution In the Virtual Meter Main Form, to click the Menu Bar->Open->Profile-->List, and the List Form will display as below. The table displays the real-time data. To click ”record” button, then the table will be added one data including No., Item (L/C/R), Value, Unit, Range, Q.C., Item (Q/D/R), and Value. In the Main Form, to click the Menu Bar->Open->Profile->Frequency Distribution. And the Frequency Distribution will display. The vertical axle means number.