User manual


Introduction
Dear customer,
with the acquisition of the Frequency Counter FC-2500 you have
obtained a state-of-the-art measurement device. It features three
inputs with channel A enabling measurements of up to 2.5 GHz
(gigahertz) at 1Mohm. Measurements up to 500 MHz at 50 ohm can
be performed at input B and up to 10 MHz at 50 ohm are possible at
input C. The frequency is displayed on an 8-digit liquid crystal dis-
play (LCD).
The product is designed according to VDE 0411 = EN 61010.
Furthermore, the FC-2500 is EMC-tested and therefore fulfils
the requirements of the relevant European and national guideli-
nes. Conformity has been proved; the relevant documents are
in the possession of the manufacturer. To preserve this conditi-
on and to enable safe operation, you as the user must observe
these operating instructions!
In case of technical questions please contact us:
Germany: Tel. [phone],
Fax [phone]
E-mail: Please use our contact form in the Internet:
www.conrad.de in the category "Contact"
Mon to Thurs 8.00am to 4.30pm Fri 8.00am to
2.00pm
19