User manual

FB-02 SWD

The remote control is connected to the converter with the includ-

ed USB cable.

Plug one end of the connection cable into the socket (1) at the

remote control, and the other into one of the two connection sock-

ets for the LCD remote control of the converter.

☞

The connection cable has a length of 1.8 m. If this is

not sufficient for your application, an optional USB

cable with a length of up to 4m can be used.

FB-03 SWD

The remote control is connected wirelessly to the converter with

the included USB radio stick. The radio receiver is already

installed in the remote control.

☞

The battery must be charged before first use of the

remote control. See chapter “Replacing

Batteries/Charging the Rechargeable Battery”

Plug the USB radio stick (10) into one of the two connection sock-

ets for the LCD remote control at the converter.



The radio connection is sufficient for a distance

of approx. 25 m at a free line of sight. This range

may, however, be negatively influenced by met-

al covers or interferences.