Datasheet

“For more than 25 years, our product range has been dynamically adapting to the constant changes in the industry. We

commit to oering ﬁrst-class quality to our customers while delivering an excellent cost-performance ratio. This philosophy

remains the cornerstone of Voltcra’s success.”

VOLTCRAFT

- TOP PERFORMANCE IN EVERY WAY

ET-200

INSULATION TESTER

VERSION 07/15

FEATURES:

Test voltages 50/100/250/500/1000 V // Insulation resist-

ance measurement up to 20 GΩ // Low-impedance meas-

urement from 0.01 - 20 kΩ //

EQUIPMENT:

Data hold function // Lock function for continuous testing

// Measurement duration selection // Calculation of po-

larisation index (PI) // Calculation of dielectric absorption

rate (DAR) // Red warning light during measurements //

Continuity tester // Integrated measurement data mem-

ory // Comparison function with pass/fail indicator // Te s t

voltages adjustable (50% - 120% in 10% increments) //

Optional test tip with trigger switch //

PACKAGE CONTENTS:

Insulation tester ET-200 // 2 measurement wires //

2 alligator clamps // 2 test tips // 6 Mignon batteries (AA)

// Bag // Operating instructions //

Legal notice

This data sheet is published by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microﬁlming, or the capture in

electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.

This data sheet represent the technical status at the time of printing.

TECHNICAL DATA:

Display: LCD 6000 counts

Test voltages: 50/100/250/500/1000 V

Insulation resistance measurement range: 0.01 MΩ - 20 GΩ

Low-impedance measurement range 0.01 Ω - 20 kΩ

Voltage measurement range 1 - 600 V/AC/DC

Measurement category: CAT IV 600 V

Product dimensions (W x H x L): 103 x 225 x 59 mm

Weight: 640 g

Protection type: IP40

Power supply: 6 Mignon batteries (AA)

Nº 1301293

Measure insulation resistances up to 20 GΩ with test voltages

50/100/250/500/1000 V. Furthermore, the ET-200 has measurement functions

for direct and alternating voltages up to max. 600 V in CAT IV and for resistances

up to 20 kΩ. The device is perfectly protected from impacts with its so rubber

protection.