Instructions
®
Furthermore, observe the safety and operating instructions as well as the neces-
sary safety requirements of the devices, systems or equipment into which you run
the camera probe.
Numerous dangers arise from improper use of the camera probe, e.g. risk of
injury or the danger from an electrical shock, etc.
• Do not use this product in rooms or under adverse environmental conditions
where combustible gases, vapours or dust are or may be present! There is a risk
of explosion!
• Caution, LED light:
Do not look directly into the LED light!
Do not look into the beam directly or with optical instruments!
• Do not expose the product to extreme temperatures, strong vibrations or strong
mechanical stress.
Handle the product with care; it can be damaged by impacts, blows or by falling
from a low height.
If you see any damage, do not use the product anymore but take it to a special-
ised workshop or dispose of it in an environmentally friendly manner.
• In commercial institutions, the accident prevention regulations of the Employer’s
Liability Insurance Association for Electrical Systems and Operating Facilities are
to be observed.
• In schools, educational centres, hobby and self-help workshops the operation of
the product is to be supervised by trained employees.
• Do not leave packaging material lying around carelessly. It may become a dan-
gerous plaything for children!
If in doubt about how to connect the device correctly, or should any questions arise that are
not answered in these operating instructions, please contact our technical advisory service or
another specialist.
Voltcraft
®
, Lindenweg 15, D-92242 Hirschau, Tel. number 0180/586 582 7
CONTROLS
123 4 5
789
6
1 Locking knob “FD”
2 Knob “RS”/”SL”
3 Knob “DS”/”SU”
4 Locking lever “FD”
5 Mounting ring
6 Connection socket; for connection to the endoscope
7 Endoscope neck
8 Joint that can be moved with knobs (2) and (3)
9 Probe tip with built-in camera and four white LEDs
OPERATING INSTRUCTIONS
4-WAY-ARTICULATION CAMERA PROBE
ITEM NO. 10 35 46
INTENDED USE
The product is intended as the camera attachment for the endoscopes “BS-500” and
“BS-1000T” (neither contained in the package, available separately) and is used there for
optical error searches or inspection of voltage-free systems and equipment. The waterproof
endoscope gooseneck is suitable for use voltage-free liquids (not acids or alkalis).
The fl exible camera neck enables you to move the camera located on the probe tip into
inaccessible positions. The probe tip can be moved steplessly in four directions with two dials.
The four light diodes installed in the probe tip enable recording in absolutely dark areas. The
power is supplied via the respective connected endoscope.
Use on humans and animals as well as in explosive areas is not permitted.
For safety and approval reasons (CE), you may not convert and/or alter the product. If you
use the product for purposes other than those described above, the product may be dam-
aged. Furthermore, improper use may cause risks such as short-circuits, fi re, electric shocks
etc. Please read the operating instructions carefully and keep them. If you pass the product
on to a third party, please pass on these operating instructions as well.
This product complies with the applicable national and European regulations.
All names of companies and products are the trademarks of the respective owners. All rights
reserved.
PACKAGE CONTENTS
• Camera probe
• Protective cap (for delivery, placed on the probe tip)
• Cleaning set
• Storage case
• Operating instructions
EXPLANATION OF SYMBOLS
The lightning symbol indicates a health hazard, e.g. electric shock.
The icon with an exclamation mark indicates particular dangers associated with
handling, function or operation.
The “arrow” symbol indicates special tips and operating instructions.
SAFETY INSTRUCTIONS
Please read all instructions before using this device, they include important
information on its correct operation. The warranty will be void in the event
of damage caused by failure to observe these safety instructions! We do not
assume any liability for any resulting damage!
We shall not accept liability for damage to property or personal injury caused
by incorrect handling or non-compliance with the safety instructions! In such
cases, the warranty will be null and void.
• The unauthorised conversion and/or modifi cation of the product is not permitted
for safety and approval reasons (CE). Never dismantle the product.
• The product is not a toy and should be kept out of the reach of children.
• The endoscope neck is protected according to IP67. However, it may be
immersed only in non-reactive liquids (no acids or bases). The operating tempera-
ture may not lie outside the permitted range (see chapter “Technical Data”).
• The product is not suitable for use on human beings or animals.
• Also observe the safety and operating instructions of any other devices that are
connected to this product.
VERSION 04/13