User manual

31
7. DISPLAY INDICATIONS AND SYMBOLS
The following symbols and information are present at the device or in the display.
OFF Switch position “off”
HOLD Call/deactivate data hold function Data-Hold function is active
OL Overow display, the measuring area was exceeded
Battery change symbol. When this symbol appears in the display, the battery must be replaced at
once to avoid measuring errors!
Symbol for the battery data used
Symbol for the diode test
Symbol for the acoustic continuity tester
AC Symbol for alternating current
DC Symbol for direct current
V, mV Volt (unit of electric voltage), Milli-Volt (exp.–3)
A, mA, µA Ampére (unit of electric current),
Milli-Ampére (exp.–3), Micro-Ampére (exp.–6)
Ω, kΩ Ohm (unit of electrical resistance), Kilo-Ohm (exp.3)
Button to switch the display lighting on and off
Symbol for the fuses used
BATT. Measuring function for battery test