User manual

28
10 Trig Out (P/F) connection: Trigger signal output or pass/fail output. The output can be selected via the menu (Utility
Menu→output→output).
11 Frequency generator output.
d) Oscilloscope controls
1 Function keys: There are a total of 11 function keys
2 Frequency generator controls
3 Control panel with 2 buttons and 1 control knob.
Usethetriggerlevelcontroltosetthetriggervoltage.Usetheother2buttonstocongurethetriggersystem
settings.
4 Horizontal control panel with 1 button and 2 control knobs.
Use the „HOR“ button to access the horizontal system settings menu, the „horizontal position“ control to set the
trigger position, and the „horizontal scale“ control to set the timebase.
5 Vertical control panel with 3 buttons and 4 control knobs.
Use the „CH1“ and „CH2“ buttons to access to the CH1/CH2 settings menu and the „Math“ button to access the
math menu, which includes six operations (CH1-CH2, CH2-CH1, CH1 + CH2, CH1 * CH2, CH1 / CH2 and FFT).
Use the two “position” control knobs to adjust the vertical position of CH1 / CH2 and the two “Scale” control knobs
to adjust the control voltage scale of CH1 / CH2.
6 Default settings: Applies the default settings.
7 Print
8 Turns the counter on/off.
9 DMM button
10 Direction buttons: Moves the cursor of the focused parameter.
11 M-control (Multi-purpose control): If the icon appears in the menu, you can use the M-control to select the
corresponding menu or value. Press the M-control to close the left and right menus.