User manual

5.Use the Arbitrary Function Generator
87
The Arbitrary signal consists of two types: the system built-in waveform and the
user-definable waveform.
To Select the Built-in Waveform
There are 46 built-in Arbitrary waveforms.
Steps for selecting the built-in waveform:
(1) Push button to show the bottom menu of generator.
(2) Select Arb in the bottom menu, select Built-in on the right menu.
(3) Select Common, Math, Window or Others in the right menu. E.g. select Others to
enter the following interface.
(4) Turn the M knob to select the desired waveform (or touch it). E.g. select Noise. Select
Select to output the noise waveform.
Note: You can push on the front panel to output DC.
Built-in Waveform Table
Name
Explanation
Common
StairD Stair-down waveform
StairU Stair-up waveform
StairUD Stair-up and stair-down waveform
Trapezia Trapezoid waveform
RoundHalf RoundHalf wave
AbsSine Absolute value of a Sine
AbsSineHalf Absolute value of half a Sine
SineTra Sine transverse cut
SineVer Sine vertical cut
NegRamp Negative ramp
AttALT Gain oscillation curve
AmpALT Attenuation oscillation curve
CPulse Coded pulse
PPulse Positive pulse