Manualshelf

User manual

ManualsBrandsVOLTCRAFT ManualsLaboratory Test EquipmentDigital 100 MHz 2-channel 1 GSa/s 40000 kpts 8 Bit Function generator, Multimeter functions, Dig
61626364656667686970
4.Advanced User Guidebook
65
is 2M. Push the Acquire button, select Length in the bottom menu, and set the
record length to a smaller value.
(5) Select Save in the bottom menu.
To save the waveform to internal memory, select Storage in the right menu
as Internal. Turn the M knob to select an object in the left menu, select Save
in the right menu.
To save the waveform onto a USB memory device, insert a USB memory
device into the port on the front panel. If the icon appears on the top right
of the screen, the USB memory device is installed successfully. If the USB
memory device cannot be recognized, format the USB memory device
according to the methods in "USB disk Requirements" on P56. Select Storage
in the right menu as External. Select Save in the right menu. An input
keyboard used to edit the file name will pop up. The name is default as current
system date and time. Turn the M knob to select the keys, push the knob to
input. Select the key in the keyboard to confirm. The cloned waveform
will be saved onto the USB memory device as a file with the ota suffix.
To output the cloned waveform in the internal memory through the generator:
(1) Push Save button.
(2) Select Type in the bottom menu, in the left menu, turn the M knob to select
Clone.
(3) Select Save in the bottom menu, select Storage in the right menu as Internal.
(4) Turn the M knob to select an object in the left menu.
(5) Select Output in the right menu.
To output the cloned waveform in the USB memory device through the
generator:
(1) Push button.
(2) Select Arb in the bottom menu, select Editable on the right menu, and select File
Browse.
(3) select Memory in the right menu as USB. The instrument lists a directory of the
folders and files on the USB memory device. Select a folder or file using the M
knob to scroll up and down the list. To enter the current folder, select Change Dir
in the right menu, select it again to return to the upper directory.
(4) Select the desired ota file, select Read in the right menu.
To output the selected waveform through the generator directly:
(1) Push Save button.
(2) Select Type in the bottom menu, in the left menu, turn the M knob to select
Clone.
(3) Select Source in the bottom menu, select one channel (CH1/CH2) in the right
menu for Source.
(4) Select Line in the bottom menu. Select the cursor and move it to select the