User manual

11.Technical Specifications
127
Performance Characteristics
Instruction
Idle Time
30 ns to 10 s
Edge Number
1 to 128
Logic Trigger
Logic Mode
AND, OR, XNOR, XOR
Input Mode
H, L, X, Rising, Falling
Output Mode
Goes True, Goes False, Is True >,
Is True <, Is True =
RS232 Trigger
Polarity
Normal, Inverted
Trigger Condition
Start, Error, Check Error, Data
Baud Rate
Common, Custom
Data Bits
5 bit, 6 bit, 7 bit, 8 bit
I2C Trigger
Trigger Condition
Start, Restart, Stop, ACK Lost, Address,
Data, Addr/Data
Address Bits
7 bit, 8 bit, 10 bit
Address Range
0 to 127, 0 to 255, 0 to 1023
Byte Length
1 to 5
SPI Trigger
Trigger Condition
Timeout
Timeout Value
30 ns to 10 s
Data Bits
4 bit to 32 bit
Data Line Setting
H, L, X
Waveform Generator
Performance
Characteristics
Instruction
Max Frequency Output 25 MHz (Sample 125 MS/s)
Channel
1
Vertical Resolution
14 bits
Amplitude Range
10 mVPP - 6 VPP
Waveform length
8K
Standard Waveforms
Sine, Square, Ramp, and Pulse
Multimeter
Performance
Characteristics
Instruction
Full scale reading
3¾ digits (Max 4000 – count)
Diode
0 V - 1.5 V
Input impedance
10 MΩ
On/Off measurement
<50(±30)Ω beeping
Capacitance
51.2nF - 100uF: ±(3%±3 digit)
Voltage
DCV: 400mV, 4V, 400V: ±(1%±1digit) Max. input: DC 1000V
ACV: 4V,40V,400V:±(1%±3digit)
Frequency: 40Hz-400Hz, Max. input: AC 750V (virtual value)
Current
DCA: 40mA,400mA: ±(1.5%±1 digi
t) 10A: ±(3%±3digit)
ACA: 40mA: ±(1.5%±3 digit) 400mA: ±(2%±1 digit) 10A: