User manual

3.Junior User Guidebook
8
6. Default: Call out the factory settings.
7. Print
8. Turn on/off the Counter.
9. DMM
10. Direction key: Move the cursor of the focused parameter.
11. M knob (Multipurpose knob): when a symbol appears in the menu, it indicates
you can turn the M knob to select the menu or set the value. You can push it to close
the menu on the left and right.
User Interface Introduction
1
3
9
20
15
28
25
7
8
10
12
17
13
18
21
22
23
27
29
6
11
19
26
2
4
5
24
14
16
5
Figure 3-5 Illustrative Drawing of Display Interfaces
1. Waveform Display Area.
2. Run/Stop (touchable) (see "How to Use Executive Buttons" on P81)
3. The state of trigger, including:
Auto: Automatic mode and acquire waveform without triggering.
Trig: Trigger detected and acquire waveform.
Ready: Pre-triggered data captured and ready for a trigger.
Scan: Capture and display the waveform continuously.
Stop: Data acquisition stopped.
4. Click to show/hide the touchable menu pane. (see "Operate the Menu through