User manual

6.Use the Multimeter

DayH M S

Record time, use the defined

interval as its refresh interval

10. When internal storage is selected: You can export the internal record file to a USB

memory device. Insert the USB memory device into the front-panel USB port on your

instrument. Select Export in the bottom menu. The instructions will be shown on the

screen. The export file will be named as "Multimeter_Recorder.csv". If a file with the

same name already exists in the USB memory device, it will be overwritten. (If you

want to keep the existing file, back up it to other location in advance.) Select Export

in the bottom menu to export.

How to chart the data

You can open the CSV file using Microsoft Excel, or your favorite spreadsheet application,

and create charts based on the data.

In the following steps, Microsoft Excel 2010 is used as an example.

1. Open Multimeter_Recorder.csv in Excel.

Interval

Measurement mode

Reference value of the

relative measurements

2. Select the data that you want to chart (see Figure 6-4).

3. On the Insert tab, in the Charts group, click Line, and then click Line in 2-D Line

(see Figure 6-5).