Instructions

8
TIMebase commands
The list of commands：
 TIMebase:WINDow:ENABle
 TIMebase:WINDow:POSition
 TIMebase:WINDow:SCALe
 TIMebase:WINDow:RANGe
 TIMebase:POSition
 TIMebase:SCALe
 TIMebase:RANGe
 TIMebase:MODE
 TIMebase:VERNier
 TIMebase:XY:XSOUrce
 TIMebase:XY:XSOUrce
TIMebase:WINDow:ENABle
Syntax :TIMebase:WINDow:ENABle <bool>
:TIMebase:WINDow:ENABle?
Description :Enable or disable the delayed sweep, or query the status
of the delayed sweep
Parameter :<bool> ::= {{1 | ON} | {0 | OFF}}
Explanation :Delayed sweep can be used to enlarge a length of waveform
horizontally to view waveform details.
Return : The query returns ON or OFF
Example :TIMebase:WINDow:ENABle 1 /*Enable the delayed sweep*/
:TIMebase:WINDow:ENABle? /* The query returns ON*/
TIMebase:WINDow:POSition
Syntax :TIMebase:WINDow:POSition <pos value>
:TIMebase:WINDow:POSition?
Description :Set or query the delayed timebase offset
Parameter :<pos value> ::= The value of the horizontal position（The
default unit is s）
Explanation : Wherein, MainScale is the current main timebase scale of
the oscilloscope,MainOffset is the current main timebase