Instructions

38
:TRIGger:UART:IDLe? /* The query returns HIGH*/
TRIGger:CAN
The list of commands：
 TRIGger:CAN:SOURce
 TRIGger:CAN:IDLe
 TRIGger:CAN:BAUd
 TRIGger:CAN:CONdition
 TRIGger:CAN:ID
 TRIGger:CAN:DLC
 TRIGger:CAN:DATA
 TRIGger:CAN:VALId
 TRIGger:CAN:ALEVel
TRIGger:CAN:SOURce
Syntax :TRIGger:CAN:SOURce <source>
:TRIGger:CAN:SOURce?
Description : Set or query the trigger source for the CAN trigger
Parameter :<source> ::= < CHANnel1 | CHANnel2 | CHANnel3 | CHANnel4>
Return : The query returns CHANnel1， CHANnel2， CHANnel3， CHANnel4
Example :TRIGger:CAN:SOURce CHANnel1 /*set trigger source CH1*/
:TRIGger:CAN:SOURce? /* The query returns CHANnel1*/
TRIGger:CAN:IDLe
Syntax :TRIGger:CAN:IDLe <idle>
:TRIGger:CAN:IDLe?
Description : Set or query the idle level in CAN trigger
Parameter :<idle> ::= <LOW | HIGH>
Return : The query returns LOW,HIGH
Example :TRIGger:CAN:IDLe LOW /* set idle level LOW*/
:TRIGger:CAN:IDLe? /* The query returns LOW*/