Instructions

35
 TRIGger:UART:BAUd
 TRIGger:UART:ALEVel
 TRIGger:UART:DATA
 TRIGger:UART:WIDTh
 TRIGger:UART:PARIty
 TRIGger:UART:WHEN
 TRIGger:UART:IDLe
TRIGger:UART:SOURce
Syntax :TRIGger:UART:SOURce <source>
:TRIGger:UART:SOURce?
Description : Set or query the trigger source for the UART trigger
Parameter :<source> ::= < CHANnel1 | CHANnel2 | CHANnel3 | CHANnel4>
Return : The query returns CHANnel1， CHANnel2， CHANnel3， CHANnel4
Example :TRIGger:UART:SOURce CHANnel1 /*set trigger source CH1*/
:TRIGger:UART:SOURce? /* The query returns
CHANnel1*/
TRIGger:UART:CONdition
Syntax :TRIGger:UART:CONdition <condition>
:TRIGger:UART:CONdition?
Description : Set or query the trigger conditions for the UART
Parameter :<condition> ::= < START| STOP| READ_DATA| PARITY_ERR|
COM_ERR>
Return : The query returns START| STOP| READ_DATA|
PARITY_ERR|COM_ERR
Example :TRIGger:UART:CONdition START /*set trigger condition to
START */
:TRIGger:UART:CONdition? /* The query returns
START*/
TRIGger:UART:BAUd
Syntax :TRIGger:UART:BAUd <baud>