Instructions

30
Parameter :<level> ::= the tigger level lower limit（unit is V）
Return : The query returns the trigger level upper limit in
scientific notation.
Example :TRIGger:WINDOw:BLEVel 0.16 /* Set the trigger level
lower limit 160mV*/
:TRIGger:WINDOw:BLEVel?/* The query returns 1.600000e-01*/
TRIGger:INTERVAl
The list of commands：
 TRIGger:INTERVAl:SOURce
 TRIGger:INTERVAl:SLOp
 TRIGger:INTERVAl:WHEN
 TRIGger:INTERVAl:TIME
 TRIGger:INTERVAl:ALEVel
TRIGger:INTERVAl:SOURce
Syntax :TRIGger:INTERVAl:SOURce <source>
:TRIGger:INTERVAl:SOURce?
Description :Set or query the trigger source for the interval trigger
Parameter :<source> ::= < CHANnel1 | CHANnel2 | CHANnel3 | CHANnel4>
Explanation : Triggered when the interval between two rising edges (or
falling edges) satisfies the set time condition
Return : The query returns CHANnel1， CHANnel2， CHANnel3， CHANnel4
Example :TRIGger:INTERVAl:SOURce CHANnel1 /* set trigger source
CH1*/
:TRIGger:INTERVAl:SOURce? /* The query returns CHANnel1*/
TRIGger:INTERVAl:SLOp
Syntax : TRIGger:INTERVAl:SLOp <slope>
: TRIGger:INTERVAl:SLOp?
Description : Set or query the edge type for interval trigger
Parameter :<slope> ::= < RISIng| FALLing>