Instructions

11
TIMebase:VERNier
Syntax :TIMebase:VERNier <value>
:TIMebase:VERNier?
Description : Setting or querying time base fine-tuning switch state
Parameter :<value> ::= {{1 | ON} | {0 | OFF}}
Explanation : Fine tuning Settings by default. At this point, you can
only press 1-2-5 step into the setting, and when the setting
is opened, you can further adjust the base gear in a smaller
range
Return : Query return ON or OFF
Example :TIMebase:VERNier ON /* Open the horizontal fine tune */
:TIMebase:VERNier? /*return ON*/
TIMebase:XY:XSOUrce
Syntax :TIMebase:XY:XSOUrce <source>
:TIMebase:XY:XSOUrce?
Description : To set or query the YT mode, source x
Parameter :<source> ::= < CHANnel1 | CHANnel2 | CHANnel3 | CHANnel4 >
Return : Query return CHANnel1，CHANnel2，CHANnel3，CHANnel4
Example :TIMebase:XY:XSOUrce CHANnel1 /* Set the source x for CH1*/
:TIMebase:XY:XSOUrce? /*return CHANnel1 */
TIMebase:XY:YSOUrce
Syntax :TIMebase:XY:YSOUrce <source>
:TIMebase:XY:YSOUrce?
Description : Set or query the YT mode, source y
Parameter :<source> ::= < CHANnel1 | CHANnel2 | CHANnel3 | CHANnel4 >
Return : Query return CHANnel1，CHANnel2，CHANnel3，CHANnel4
Example :TIMebase:XY:YSOUrce CHANnel1 /* Set the source y for CH1*/
:TIMebase:XY:YSOUrce? /*return CHANnel1 */