User manual

DSO-1000D Series User Manual

Default Setup

To activate the default state,

press Default.

Default

Autoset

Background

The Autoset function automatically configures the

panel settings to position the input signal(s) to the

best viewing condition. The DSO-1000D

automatically configures the following parameters:

 Horizontal scale

 Vertical scale

 Trigger source channel

There are two operating modes for the Autoset

function: Fit Screen Mode and AC Priority Mode.

Fit Screen Mode will fit the waveform to the best

scale, including any DC components (offset). AC

priority mode will scale the waveform to the

screen by removing any DC component.

Panel Operation

1. Connect the input signal to the

DSO-1000D and press the Autoset

key.

Autoset

2. The waveform appears in the center of the

display.

Before

After

3. To undo Autoset, press Undo

Autoset from the bottom menu.