User manual

DSO-1000D Series User Manual
24
The ratio and the position of the displayed
waveform compared to the internal memory (page
89). The color of the active channel/bus is also
shown as the color of the waveform within the
memory bar.
Trigger Status
Trig’d
Triggered.
PrTrig
Pre-trigger.
Trig?
Not triggered, display not updated.
Stop
Trigger stopped. Also appears in
Run/Stop (page 40).
Roll
Roll mode.
Auto
Auto trigger mode.
For trigger details, see page 104.
Acquisition Mode
Normal mode
Peak detect mode
Average mode
For acquisition details, see page 78.
Signal Frequency
Shows the trigger source
frequency.
Indicates the frequency is
less than 2Hz (lower
frequency limit).
Trigger
Configuration
Trigger source, slope,
voltage, coupling.
Horizontal Status
Horizontal scale,
horizontal position.
For trigger details, see page 104.
Channel Status
Channel 1, DC coupling, 2V/Div.
For channel details, see page 96.