User manual

DSO-1000D Series User Manual
198
Peak Detection
2nS (typical)
Average
selectable from 2 to 256
X-Y Mode
X-Axis Input
Channel 1; Channel 3
Y-Axis Input
Channel 2; Channel 4
Phase Shift
±3° at 100kHz
Cursors and
Measurement
Cursors
Amplitude, Time, Gating available; Unit:
Seconds(s), Hz(1/s), Phase(degree), Ration(%)
Automatic
Measurement
36 sets: Pk-Pk, Max, Min, Amplitude, High, Low,
Mean, Cycle Mean, RMS, Cycle RMS, Area, Cycle
Area, ROVShoot, FOVShoot, RPREShoot,
FPREShoot, Frequency, Period, RiseTime, FallTime,
+Width, -Width, Duty Cycle, +Pulses, -Pulses,
+Edges, -Edges, FRR, FRF, FFR, FFF, LRR, LRF,
LFR, LFF, Phase
Cursors
measurement
Voltage difference between cursors ( ∆V) Time
difference between cursors ( ∆T)
Auto counter
6 digits, range from 2Hz minimum to the rated
bandwidth
Control Panel
Function
Autoset
Single-button, automatic setup of all channels for
vertical, horizontal and trigger systems, with undo
Autoset
Save Setup
20set
Save Waveform
24set
Display
TFT LCD Type
7" TFT WVGA color display
Display
Resolution
800 horizontal × 480 vertical pixels (WVGA)
Interpolation
Sin(x)/x
Waveform
Display
Dots, vectors, variable persistence (16ms~4s),
infinite persistence
Waveform
Update Rate
50,000 waveforms per second, maximum
Display
Graticule
8 x 10 divisions
Display Mode
YT, XY
Interface
USB Port
USB 2.0 High-speed host port X1, USB High-speed
2.0 device port X1
Ethernet Port
(LAN)
RJ-45 connector, 10/100Mbps with HP Auto-MDIX
Go-NoGo BNC
5V Max/10mA TTL open collector output
Kensington
Style Lock
Rear-panel security slot connects to standard
Kensington-style lock
Miscellaneous
Multi-language
menu
Available
Operation
Environment
Temperature: 0°C to 50°C. Relative Humidity ≤
80% at 40°C or below; ≤ 45% at 41°C ~ 50°C