User manual

Digital Storage Oscilloscope 36
• Remote Data - The oscilloscope will trigger on data frames matching the
specified remote data.
a. Press the Data softkey to select the ID number.
b. Press the Data softkey to move the current bit, and turn the universal to select
the byte to be set.
• Data Frame data –The oscilloscope will trigger on data frames matching the
specified data frame data.
• Error –The oscilloscope will trigger on error frames matching the specified data.
• All Error - The oscilloscope will trigger when any form error or active error is
encountered.
• Ack Error –The oscilloscope will trigger when the comfirm is high.
• Overload Frame - The oscilloscope will trigger on overload frames.
Data Index: Set the data index, the range is from 0 to 3.
Note: When DataMask is ON, the setting data is invalid.
Source: CH1; Baund Rate: 1000000; Idle Level: Low; Identifier:0x12efabcd;
2.7.13 SPI Triggering
In SPI trigger, when timeout condition is satisfied, the oscilloscope triggers when the
specified data is found. When using SPI trigger, you need to specify the SCL clock