Instructions

Digital Storage Oscilloscope 59
Chapter 3 Waveform Generator
The series oscilloscope is equipped with waveform generator function, with one
channel of arbitrary waveform output. User can edit the arbitrary waveform or choose
the regular waveforms such as Sine, Ramp, Square, Exponent, Noise, DC and AM/FM.
3.1 Set Wave Type and Parameters
1. Press the [Wave Gen] button on the front panel to open the arbitrary waveform
generator function.
2. Press the Wave softkey; then turn the Universal Knob to select the desired
waveform and push down the knob to confirm. Press the Wave Type softkey
continually can also select the waveform type.
3. Press the Frequency softkey to set frequency.
4. Press the Amplitude softkey to set amplitude.
5. Press the Offset softkey to set offset.
Set the value of frequency, Amplitude or Offset:
: Horizontal arrow, turn the Universal Knob to select a digit and push down the
knob to confirm.
: Vertical arrow, turn the Universal Knob to set the value of the selected digit.
The waveform will output from GEN OUT BNC port.