Instructions

Digital Storage Oscilloscope 41
oscilloscope to the internal memory.
5. Press the SetUp softkey button, then turn the Universal Knob to select the location
to save. The internal memory can save as many as 9 setup files, from No.1～No.9.
6. Press the Save softkey to save the current setup to the appointed location. After a
few seconds, it will pop-out the message “Save successfully”.
Load the specified type of file in internal memory.
If want to recall the setup after having finished the steps above, please do the following
steps: Press the Recall softkey, and then turn the Universal Knob to select the
location that you want to recall, press the Recall softkey to recall the setup, and it will
pop-out the message “Recall Successfully”.
2.8.2 External save and recall
Before using external storage and recall, make sure that the USB flash device is
connected correctly. External storage supports all the types of files in save, but in recall,
CSV are not supported.
Save the specified type of file in the external USB flash device.
1. Press the [Save/Recall] button on the front panel to enter the SAVE/RECALL
function menu.
2. Press the Save softkey to select Wave or Setup
4. Use the SaveTo softkey to external location. Press Save softkey and into USB
storage interface. File can be stored under the root directory or in a certain folder under
the root directory of the USB storage device.
5. Press the Save softkey to save the current waveform to the external USB storage
device,
Load the specified type of file in the external USB storage device.
1. Press the [Save/Recall] button on the front panel to enter the SAVE/RECALL
function menu.
2. Press the Type softkey to select Wave or Setup
3. Press the Recall softkey to enter the SAVE/RECALL file system.
4. Turn the Universal Knob to select the file to be recalled, press the Recall softkey to
recall the waveform or setup.