User manual

DSO-1052 USB
DSO-1082 USB
4.1 Simple Measurement
To acquire a
1.
nd display a signal, please do the steps as follows:
Connect signal to CH1 by using probe
r or “Acquire” -> “Auto Setup” on menu.
ency and “Vpp”, you can do these steps as follows:
-> “Frequency” button, the frequency of the signal
interface.
l”-> “Peak-to-Peak” button, the “Vpp” of the signal will
also display on the bottom of the waveform interface.
3. To clear the measurement on the waveform interface, click the “Measure”-> “Clear
easure” button
.
2. Click the button on toolba
To measure the frequ
1. Click the “Measure”-> “Horizontal”
display on the bottom of the waveform
2. Click the “Measure”-> “Vertica
M
USER’S MANUAL 70