Manualshelf

User manual

ManualsBrandsVOLTCRAFT ManualsLaboratory Test EquipmentPC scope module DSO-2150AL 80 MHz 2-channel 250 null 64 null 8 Bit Digital storage (DSO), Spectrum analyzer
41424344454647484950
DSO-1052 USB
DSO-1082 USB
Source: select the signal that the oscilloscope
uses as a gnal connected to a channel BNC, or to the
EXT. BNC.
You can use the trigger source options to
trigger. The source can be any si
CH1: Select CH1 as trigger signal
CH2: Select CH2 as trigger signal
ALT: Select CH1 and CH2 as trigger signal
EXT: Select EXT as trigger signal
EXT/10: Select attenuated EXT/10 as trigger signal (Only DSO-1082 USB)
Set the slope to Rising (+) or Falling (-
Slope: ).
Rising: Trigger on rising edge
Falling: Trigger on falling edge
ts the trigger level to the center of the waveform amplitude.
nel in sidebar.
50%: Se
The user can also change the trigger setting on trigger pa
USER’S MANUAL 40