User manual

DSO-1052 USB
DSO-1082 USB
3.3.2 Change Format
Click “Format” menu:
In the “Format” item, set the waveform display format (Y-T, X-Y and Roll).
Y -T: Shows the relative relation between vertical voltage and horizontal time.
oll: In Roll Mode, the waveform display updates from right to left.
X -Y: Show CH1 value at X axis; CH2 value at Y axis.
Roll mode, the waveform display rolls from right to left. No trigger or horizontal offset
ontrol of waveforms is available during Roll Mode, and it’s only available when set to
ger than 1s, the format will change to Roll mode automatically.
3.3.3 Change Horizontal Position
The “Zero” menu:
R
In
c
1s/div or slower.
Caution: If the time/div big
Click “Zero” to set the trigger point to the horizontal center of the screen.
Horizontal position changes the displayed waveform position, relative to the trigger point.
The user can drag
on screen to change the horizontal position.
USER’S MANUAL 38