User manual

COMMAND DETAILS
97
Measurement Commands
:MEASUrement:MEAS<X>:SOURCE<X> ....................97
:MEASUrement:MEAS<X>:TYPe .................................98
:MEASUrement:MEAS<X>:STATE ..............................98
:MEASUrement:MEAS<X>:VALue...............................99
:MEASUrement:MEAS<X>:MAXimum .....................100
:MEASUrement:MEAS<X>:MEAN ............................101
:MEASUrement:MEAS<X>:MINImum .....................101
:MEASUrement:MEAS<X>:STDdev ..........................102
:MEASUrement:STATIstics:MODe ...........................103
:MEASUrement:STATIstics:WEIghting .....................103
:MEASUrement:STATIstics .......................................104
:MEASUrement:MEAS<X>:SOURCE<X>
Description
Sets or queries the measurement source for a
selected automatic measurement. This is a statistics
related command.
Syntax
:MEASUrement:MEAS<X>:SOURCE<X> { CH1 | CH2 |
CH3 | CH4 | MATH | ? }
Related
commands
:MEASUrement:MEAS<X>:TYPe
Parameter
MEAS<X>
The automatic measurement number
from 1 to 8.
SOURCE<X>
SOURCE1: the source for all single
channel measurements.
SOURCE<X>
SOURCE2: the source for all delay or
phase measurements.
CH1 to CH4
Channel 1, 2, 3, 4
MATH
Math source
Set
Query