Instructions

36
Symbol Meaning
/
Ready to deactivate limit pause function by holding button ENTER (7) for few seconds.
Days,unitforremainingtime.(Iftheremainingtimeisbelowoneday,remainingtimeisshownin
HH:MM format.)
Readytoupgradermware.
Measurement error
Measured values are beyond the measuring range.
Congurationerror.Anerroroccurredduringconguration.Repeatthecongurationprocess.
8. LED status display
LED indicator Description
Green LED control light
(3)isashing.
Measuredvalue(s)arewithintheconguredlimitsoflowandhighalarm.
Red LED control light
(2)isashing.
Memory is full.
Measuredvalue(s)areexceedingconguredlimitsoflowandhighalarm.
Inmode“STARTUPONKEYPRESS”or“STOPTIME”recordinghasbeenterminated.
(Inordertostartrecordingagain,re-conguredatalogger.)
In mode “START UPON KEYPRESS”, data logger is ready to start recording.
(InordertostartrecordingholdbuttonENTER (7) pressed for few seconds.)
Red LED control light
(2) is continuously on.
Data logger is generating PDF report.
Green LED control light
isashingtwice.
Congurationwassuccessful.
Firmware has been updated successfully.
No LED light is on. LED-alarmwasdisabledduringconguration.