Manualshelf

Certifications 2

ManualsBrandsVOLTCRAFT ManualsEnvironmental Testing EquipmentUSB Temperature & Humidity Data Logger
12345678
February 2018 – Version 2.0 – Li-SOCl
2
single cells and multi-cell battery systems Page 5
Do not expose the unit to water or condensation.
Do not directly heat, solder or throw into fire. Such unsuitable use can cause leakage or spout vaporized electrolyte
fumes and may cause fire or explosion.
8. EXPOSURE CONTROLS AND PERSONAL PROTECTION* (not anticipated under normal use)
Respiratory
protection
In all fire situations, use self-contained breathing apparatus
Hand
protection
In case of leakage wear protective gloves
Eye
protection
Safety glasses are mandatory during handling
Other
In the event of leakage or ruptured cells, wear a rubber apron and protective clothes.
*AFNOR pictograms
Occupational exposure standard:
Compound 8 hour TWA 15 min TWA SK
Sulfur Dioxide 1 ppm 1 ppm -
Hydrogen chloride 1 ppm 5 ppm -
9. PHYSICAL AND CHEMICAL PROPERTIES
The lithium-thionyl chloride cell or battery described by this Battery Information Sheet is a sealed unit when offered for
sale. It is a manufactured “article” and does not expose the user to hazardous chemicals when used in accordance with
manufacturer specifications.
Appearance – Cylindrical shape
Odour – If leaking, gives off a pungent corrosive odour
Flash point – Not applicable Flammability – Not applicable
Boiling Point – Not applicable Melting Point – Not applicable
Vapor Pressure – Not applicable Vapor Density – Not applicable
pH – Not applicable Specific Gravity – Not applicable
Solubility (in water) – Not applicable Solubility (other) – Not applicable
10. STABILITY AND REACTIVITY
The battery system is stable when handled and stored according to section 4.
MATERIALS TO AVOID: Oxidizing agents, bases, water. Avoid electrolyte contact with aluminium or zinc.
CONDITIONS TO AVOID: Do not heat above 100°C (or higher (150°C) for High Temperatures cells and batteries such as the
LSH20-150 cell- refer to individual data sheets for maximum temperatures) or incinerate. Do not disassemble, crush, pierce,
short, charge or recharge. Avoid mechanical or electrical abuse.