User manual






 






 th .
1. Remove the connected consumer from the output.
2. Switch on the power supply via On / off switch  (1) The display (2) lights up and the voltage and current
indicator appears in the display.
3. Set the parameters according to your guidelines as described in the chapter “Start up“. Check the correctly set
output voltage once more.
4. Connect the positive pole (+) of the consumer to the red socket “+” and the negative pole (-) to the black
socket “-” of the output.
 The green jack provides the earthing connection
MAIN OUTPUT
5. The connected consumer can now be switched on.
 The current consumption of the connected consumer is indicated in the display (2) in ampere (A) .