Manualshelf

User manual

ManualsBrandsVOLTCRAFT ManualsEnergy ManagementEnergy consumption meter set Cost Control 3000 Set-2011
11121314151617181920
18
Operation
If the product is overloaded, it may be damaged . The warranty/guarantee will become void in these cases.
Do not plug together several energy cost measuring instruments.
The device is not approved for use in areas where there is a risk of explosions.
Avoid areas with strong magnetic elds (motors etc.).
Avoid blows or strong vibrations, as well as the use in direct sunlight.
Plug the energy cost measuring instrument into a domestic wall socket with earth protection and 230 V AC voltage.
Make sure that the electric device you wish to measure is switched off. Connect the mains plug of the electrical device to the earthed
socket (1).
Switch on the electric device and wait a few seconds until the measuring instrument shows the rst measured data.
The following displays can be switched between using the control keys:
Display on the top right
The key ▲(3) switches the functions in the upper left display. Every time you press the key, you switch the display.
Mains voltage, mains frequency, power factor, mains voltage ...
230 3680
6.20
V W
TO TA L kWh
50 3680
6.20
W
TO TA L kWh
Hz
0.98
3680
6.20
W
TO TA L kWh
Display on top right
The key ▼ (2) switches the functions for the upper right display. Every time you press the key, you switch the display.
Effective power, max. measured power, alarm limit (W or A), cost forecast (to switch between day/month/year use the „SET“ key),
current consumption, max. measured current consumption, effective power ...
230 25
6.20
V W
TO TA L kWh
230 48
6.20
V W
TO TA L kWh
MAX
230 3000
6.20
V W
TO TA L kWh
OVERLOAD
230 0.50
6.20
V
TO TA L kWh
FORECAST
D AY
230 0. 06
6.20
V
TO TA L kWh
A
230
0.208
6.20
V
TO TA L kWh
MAX
A
The MAX values can be cleared in the relevant display by pressing the „SET“ key (8) for approx. 3s. A short beep conrms the
deletion process.
Display on the bottom
The key ● (9) switches the functions of the lower display. Every time you press the key, you switch the display.
Electrical work (total power consumption), electricity tariff, total electricity costs, total operating
time, electrical work (total power consumption) ...