Data Sheet

“For more than 35 years, our product range has been dynamically adapting to the constant changes in the industry. We commit to offering rst-class

quality to our customers while delivering an excellent cost-performance ratio. This philosophy remains the cornerstone of Voltcraft’s success.”

VOLTCRAFT

- TOP PERFORMANCE IN EVERY WAY

CAA-1L 16

MEASURING ADAPTER

VERSION 07/19

Nº 1973631

The measuring adapter measures together with a clamp meter or multimeter the electrical current and voltage of sin-

gle-phase devices with corresponding connectors. The measuring adapter is inserted between the electrical consumer

and the socket. The measuring adapter may only be used in the range of the overvoltage category CAT II in AC voltage

networks with a nominal voltage of max. 250 V/AC which are fused with 16 A.

FEATURES:

Easy current measurement in closed line systems

with power plugs //

Facilitates measuring of current and leakage current

at the same time //

Overvoltage category CAT II //

PACKAGE CONTENTS:

Adapter // Operating instructions

TECHNICAL DATA:

Connection plug/socket IEC C19/C20

Nominal voltage max. 250 V/AC, 50/60 Hz

Nominal current max. 16 A

Protection type IP40

Conductor cross section 3 x 1,5 mm

Operating conditions 0 to +53 °C, 0 – 75 % RH (non-condensing)

Storage conditions 0 to +53 °C, 0 – 75 % RH (non-condensing)

Overvoltage category CAT II 250 V/AC, 50/60 Hz, 16 A

Bar diameter of the measuring

chambers

approx. 13 mm

Measuring sockets 4 mm

Dimensions (L x W x H) approx. 1797 x 90 x 45 mm

Weight approx. 410 g

This data sheet is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture

in electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is

prohibited. This publication represent the technical status at the time of printing.