User manual

Brightness level

Memory full

Memory status

Zoom level (1–4x)

Battery indicator

Switching on the endoscope and basic functions

• Press the

button (11) to switch on the endoscope.

• The camera image will appear on the monitor. Press the

button to rotate the image by 180º. Press this button again to

rotate the image by another 180º.

• The camera head features four built-in LEDs with six

brightness levels.

• Press the

button when the camera is switched on. Each

press increases the brightness. The monitor will briey display

the brightness level in the status bar.

• To turn the LED light off, press the button when the maximum

brightness level has been reached. Press the

button

again to switch the LED light back on.

Adjust the brightness so that the image displayed on

the monitor is not over- or underexposed.

• Press the

button to enlarge the image. Press the

button again to zoom in further. The maximum zoom level is

4x, after which the image will revert to the normal size.