Manualshelf

Operation Manual

ManualsBrandsVoltcraft ManualsBattery ChargerB6 Multi
81828384858687888990
89
18. Information by the charger
Various information is indicated on the display during a charge/discharge process by repeatedly
pressing the button "DEC".
End VoltageEnd Voltage
End VoltageEnd Voltage
End Voltage
12.6V(3S) 12.6V(3S)
12.6V(3S) 12.6V(3S)
12.6V(3S)
Capacity Cut-OFFCapacity Cut-OFF
Capacity Cut-OFFCapacity Cut-OFF
Capacity Cut-OFF
ON 5000mAhON 5000mAh
ON 5000mAhON 5000mAh
ON 5000mAh
4.14 4.16 4.094.14 4.16 4.09
4.14 4.16 4.094.14 4.16 4.09
4.14 4.16 4.09
0.00 0.00 0.000.00 0.00 0.00
0.00 0.00 0.000.00 0.00 0.00
0.00 0.00 0.00
IN Power VoltageIN Power Voltage
IN Power VoltageIN Power Voltage
IN Power Voltage
12.56V 12.56V
12.56V 12.56V
12.56V
Ext.Temp 26CExt.Temp 26C
Ext.Temp 26CExt.Temp 26C
Ext.Temp 26C
USB/Temp SelectUSB/Temp Select
USB/Temp SelectUSB/Temp Select
USB/Temp Select
USB EnabledUSB Enabled
USB EnabledUSB Enabled
USB Enabled
Safety TimerSafety Timer
Safety TimerSafety Timer
Safety Timer
ON 200minON 200min
ON 200minON 200min
ON 200min
Voltage of the accumulator at the end of charging/
discharging
Accumulator capacity for safety cutoff
Time for safety timer
Operating mode of the 3-pole connector (USB or
temperature sensor)
Temperature measured by the external temperature
sensor (not part of the delivery)
Input voltage
With the "INC" button, you can switch to the display of the voltage in the individual cells (this
only makes sense if the balancer connections are used with lithium accumulators).
Example of a 3-cell LiPo accumulator: