Operation Manual

• With the "INC" button, you access the next setting (or with the button "DEC" the previous

setting). Return to the main menu with the button "Batt Type/Stop".

Here you can set the sensitivity of the delta-U detection of NiMH accumulators (voltage

difference in the delta-U charge procedure).



An excess value may overcharge the accumulator. If the value is not high

enough, the accumulator may not be charged sufficiently.

Briefly press the button "Start/Enter". The voltage value then begins to flash.

With the buttons "INC" or "DEC", you can select the voltage value (5 to 20mV). If you select

"DEFAULT", the charger uses a voltage of 7mV.

Save the setting with the button "Start/Enter"; the voltage stops blinking.

• With the "INC" button, you access the next setting (or with the button "DEC" the previous

setting). Return to the main menu with the button "Batt Type/Stop".

Here you can set the sensitivity of the delta-U detection of NiCd accumulators (voltage

difference in the delta-U charge procedure).



An excess value may overcharge the accumulator. If the value is not high

enough, the accumulator may not be charged sufficiently.

Briefly press the button "Start/Enter". The voltage value then begins to flash.

With the buttons "INC" or "DEC", you can select the voltage value (5 to 20mV). If you select

"DEFAULT", the charger uses a voltage of 12mV.

Save the setting with the button "Start/Enter"; the voltage stops blinking.

• With the "INC" button, you access the next setting (or with the button "DEC" the previous

setting). Return to the main menu with the button "Batt Type/Stop".

The small 3-pole connection on the left side of the charger serves to connect a temperature

sensor (not part of the delivery, must be ordered separately).

NiMH SensitivityNiMH Sensitivity

NiMH Sensitivity

D.Peak 10mV/CellD.Peak 10mV/Cell

D.Peak 10mV/Cell

NiCd SensitivityNiCd Sensitivity

NiCd Sensitivity

D.Peak DefaultD.Peak Default

D.Peak Default

USB/Temp SelectUSB/Temp Select

USB/Temp Select

Temp Cut-Off 80CTemp Cut-Off 80C

Temp Cut-Off 80C