Operation Manual

76
• To begin the charging process, keep the "Start/Enter" button pressed (approx. 3 seconds).
• If the settings are wrong, or if the charger detects a problem, an audio signal is emitted and
the appropriate information is shown on the display.
You can stop the audio signal by pressing the "Batt Type/Stop" button. You then return to
the previous configuration menu.
• If the accumulator is detected correctly, the following display appears, for example:
Accumulator type Charge current Accumulator voltage
Current charging duration Charge capacity in mAh
• Once the charging process has been completed, an audio signal is emitted.

If you wish to terminate the charging process beforehand, press the "Batt Type/
Stop" button.
Pb-6 0.5A 12.59VPb-6 0.5A 12.59V
Pb-6 0.5A 12.59VPb-6 0.5A 12.59V
Pb-6 0.5A 12.59V
CHG 022:20 00207CHG 022:20 00207
CHG 022:20 00207CHG 022:20 00207
CHG 022:20 00207