Operation Manual

49
10. "USER SET" configuration menu
USER SETUSER SET
USER SETUSER SET
USER SET
PROGRAM-> PROGRAM->
PROGRAM-> PROGRAM->
PROGRAM->
TEMP CUT OFFTEMP CUT OFF
TEMP CUT OFFTEMP CUT OFF
TEMP CUT OFF
ON 50CON 50C
ON 50CON 50C
ON 50C
SAFETY TIMERSAFETY TIMER
SAFETY TIMERSAFETY TIMER
SAFETY TIMER
ON 180minON 180min
ON 180minON 180min
ON 180min
v
Start/Enter
CAPACITY CUT OFFCAPACITY CUT OFF
CAPACITY CUT OFFCAPACITY CUT OFF
CAPACITY CUT OFF
ON 5000mAhON 5000mAh
ON 5000mAhON 5000mAh
ON 5000mAh
KEY BEEP ONKEY BEEP ON
KEY BEEP ONKEY BEEP ON
KEY BEEP ON
BUZZER ONBUZZER ON
BUZZER ONBUZZER ON
BUZZER ON
INPUT POWER LOWINPUT POWER LOW
INPUT POWER LOWINPUT POWER LOW
INPUT POWER LOW
CUT-OFF 10.0VCUT-OFF 10.0V
CUT-OFF 10.0VCUT-OFF 10.0V
CUT-OFF 10.0V
BACK-LIGHTBACK-LIGHT
BACK-LIGHTBACK-LIGHT
BACK-LIGHT
100% 100%
100% 100%
100%
INC
vu
DEC
INC
vu
DEC
INC
vu
DEC
INC
vu
DEC
INC
vu
DEC
t
v
s
INC
Batt Type/Stop
DEC
s
Select the option "USER SET" from the main
menu using the "Batt Type/Stop" key, confirm
with the "Start/Enter" key.
Does not apply to this charger model.
The safety timer starts automatically when
charging begins; it protects the battery from being
overloaded (or if the delta-U cut-off mechanism
cannot find a peak). Do not set the time to be
shorter than the anticipated charging time!
Set the maximum battery charge capacity here.
This also protects against overloading (or if the
delta-U cut-off is not working).
"KEY BEEP" can be used to switch the key press
sound on or off. "BUZZER" can be used to switch
the alarm signifying an error in charging or
changes in the charging process on or off.
This function monitors the voltage at the charger
input (e.g. for a 12V battery). If the voltage drops
below the configured value, the charging process
is stopped.
Adjust the background lighting brightness here.