Datasheet

ManualsBrandsVOLTCRAFT ManualsTest & MeasurementHandheld multimeter digital Calibrated to: Manufacturer standards Vehicle testing CAT III 600 V Display

TECHNICAL DATA

Display 3

-digit LCD

Speed of measurement 2 measurements / sec.

Input resistance approx. 10MΩ

Battery replacement symbol <7.5V +/- 0,5V

Acoustic signal for each button activation

Battery required 9V compound battery, NEDA 1604 or 006P type

Operating temperature 0°C to 50°C

Storage temperature -20°C to 60°C

Rel. air humidity < 70% (non-condensing)

Operating height up to a max. 2,000 m above MSL

Temp. for guaranteed accuracy +18°C to +28°C

Weight (incl. battery) approx. 220 g

Dimensions (LxWxH) 146 x 66 x 41 (mm)

Type of operation Measuring range Accuracy Resolution

DC Volt 400 mV ±(0.8 %+3dgt) 0.1 mV

4 V ±(1.5 %+3dgt) 0.001 V

40 V ±(1.5 %+3dgt) 0.01 V

400 V ±(1.5 %+3dgt) 0.1 V

600 V ±(2.0 %+5dgt) 1 V

Overload protection: 600 V; input resistance: 10 MΩ

AC Volt 400 mV ±(1,8%+40dgt) 0.1 mV

4 V ±(1.3%+3dgt) 0.001 V

40 V ±(1.8%+3dgt) 0.01 V

400 V ±(1.8%+3dgt) 0.1 V

600 V ±(2.5%+6dgt) 1 V

Overload protection: 600 V; input resistance: 10 MΩ

No auto range in the 400 mV range

Frequency of the alternating voltage: 50 Hz to 400 Hz

DC Ampere 400 µA ±(1.0%+3dgt) 0.1 µA

4000 µA ±(1.5%+3dgt) 1 µA

40 mA ±(1.5%+3dgt) 0.01 mA

PACKAGE CONTENT

Digital Multimeter AT-200 // 9 V block // Rubber holster // Safety measurement cables // 2 Alligator clip // K-type

thermo-sensor // Revolutions sensor // Operating instructions

This data sheet is published by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing

systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This data sheet represents the technical status at the

time of printing.