User manual

OS-10V 02/04/2001 Rev.2
12
There are some cases which X axis requires control from external signals, e.g. external
connection of sweep signals, signals of Lissajous pattern or other equipment’s display
setup. X-Y mode operation is turn [10] to EXT/X, input signals through [13],
sensitivity to be adjusted directly with [14], then input Y signal through [18].
5 . ACCESSORIES
1 Probe 1 pc.
2 Cord 1 pc.
3 User’s manual
WARNING
DO NOT OPEN THE CASE, HIGH VOLTAGE EXISTED.