User manual




Frequency range 100 mHz to 10 MHz (+/- 3dB) Sine, rectangle, triangle
Frequency accuracy +/- 2% (of the measuring range)
Symbol 7-digit LED green
Output impedance 50 Ohm +/- 5%
Amplitude max. 20 Vpp (without closure) Rectangle: max. 17 Vpp
max. 10 Vpp (at 50 Ohm) Rectangle: max. 7.5 Vpp
Symmetry setting 1:1 to 10:1 at 100 kHz
VCF-input 0 - 10 V/DC/AC
Dampener -20dB
DC offset/output +/- 10V (without terminator)
+/- 5V (at 50 Ohm)
Total harmonic distortion, sine < 1% 10 Hz to 100 kHz
Rectangular signal Rise/drop time <120ns
Triangular signal Linearity >99% from 0.1 Hz to 100 kHz
TTL-output Rise/drop time <25 ns (at 1 MHz)
Level High =/>2.4 V/Low =/<0.4V
Wobble function Mode Linear
Bandwidth (Width) 1:1 to 100:1
Wobble time (Rate) 20 ms to 2 s (50 Hz to 0.5 Hz)
Impedance 1 kOhm
Frequency counter Frequency range 2 Hz - 100 MHz
Accuracy Time basis error +/- 1 Count
Sensitivity 100 mVrms
Max. input voltage 48 Vpp (17 Vrms)
Overvoltage protection (max.) 250 Vpp (88 Vrms)
Time basis 10 MHz, quartz oscillator +/-20 ppm

Operating voltage 206 - 252 V/AC 50/60 Hz Fuse: F250mA/250V (quick-acting)
103 – 126 V/AC 50/60 Hz Fuse: F500mA/250V (quick-acting)
Power consumption 20 W
Measuring category CAT II 250 V
Degree of contamination 2
Operating temperature 0°C to 40°C (operation) -20°C to 70°C (storage)