User manual

TROUBLESHOOTING
Status Potential cause Remedy
Charger will not start. No mains voltage. Checkthemainsvoltagesupply.
Deviceoverheatsand
switches off.
Allow the device to cool down.
Intermittent contact at the
terminals.
Checkconnectionsbetween
charger and battery.
Output short-circuited.
Charging not stable. DIPswitchsettingsdonot
match battery type.
SetDIPswitchesforbatterytype.
Battery is not charged
through to Phase 4.
Battery data do not match
thetechnicalspecication
of the device.
Battery cannot be charged using
the device.
Battery is defective. Disposeofthebattery.
TECHNICAL SPECIFICATION
Input voltage .........................................200-240 V/AC, 50/60 Hz
Primarycharge,bulk/absorption ...........12V-Version:14,2V/14,6V/14,8V
24 V-Version: 28,4 V / 29,2 V / 29,6 V
Primarycharge,oat ............................12V-Version:13,2V/13,5V/13,8V
24 V-Version: 26,4 V / 27,0 V / 27,6 V
Output ripple .........................................< 50 mA at full load
Efciencyupto .....................................87 %
Load equalisation .................................1.5%ofoutputcurrent:noload~atfullload
Operating temperature .........................0 - 40 °C
Insulated battery connections ...............2
Ventilation .............................................Cooling fan
Itemno. 201540 201541 201542 201543 201544
Max.chargecurrent 15A 30A 40A 10A 20A
Max.batterycapacity 30-200Ah 40-300Ah 50-600Ah 20-150Ah 25-300Ah
Width (ca.) 200 mm 240 mm 240 mm 200 mm 240 mm
Length(ca.) 215mm 235mm 235mm 215mm 235mm
Height (ca.) 80 mm 80 mm 80 mm 80 mm 80 mm
Weight(ca.) 1,7kg 2,5kg 2,8kg 1,9kg 2,8kg
( Legal notice
TheseoperatinginstructionsareapublicationbyVoltcraft®,Lindenweg15,D-92242Hirschau/Germany,
Phone+49180/5865827(www.voltcraft.de).
Allrightsincludingtranslationreserved.Reproductionbyanymethod,e.g.photocopy,microlming,orthecapturein
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in technology and equipment
reserved.
© Copyright 2010 by Voltcraft®.