User manual

3. GETTING STARTED

Attherststartofthesoftware,youneedtoselecttheCOMportofthe„ChargeManager2024“accordingtotheentryinthecontrolpanel(in

thisexample„COM7“.

Thissettingcanbechangedunder„Settings/COM-Port“later.

Afterconrmingtheselectionwith„OK“,themainwindowofthesoftwareappears.

Byclickingthebutton„StartLogging“(upperleft),recordingofthedatawillbestarted(thebuttonswitchesitscolourfromredtogreenand

thelabelswitchesto„stoplogging“).

 Thechargermustbeinoperation,i.e.thedisplaylightingofthe„ChargeManager2024“ison.

Toterminatedatarecording,clickthebuttonagain.Thecolourchangesbacktored(andthelabelofthebuttonbackto„StartLogging“,see

above).

 Ifnodataarerecordedbythechargerformorethanapprox.10secondsbecause,e.g.,theconnectiontothechargerhasbeendis-

connected,theprogrammewillautomaticallyinterruptdatarecording.Continuationoftherecordingispossible.