User manual

- Bicolour LED / light-emitting diode (two-colour)

- Diode

- Diode network

• Automatic determination of pin assignment, simply connect it

in any way

• Identicationofdiodeprotectionandshuntresistors

• Gain measurement for bipolar transistors

• Leakage current measurement for bipolar transistors.

• Silicon and germanium detection for transistors.

• Gate threshold measurement for self-conducting MOSFETs.

• Forward bias measurement of semiconductors for diodes,

LEDS and transistor base-emitter connections.

• Automatic and manual shut down

The signal measured is shown on the display.

The measuring device is operated with a 12 V 23 A battery

No charge/voltage should be connected to the device.

Using the product for any purposes other than those described

abovemaydamagethe productandresultina shortcircuit,re

or electric shock.

Theproductmustnotbemodiedorreassembled.Donotattempt

to open the device housing.

Measurements must not be made in potentially explosive areas,

damp rooms or outdoor spaces, or in areas with adverse environ-

mental conditions.