User manual

8. Operation
a) General information
• Assoonasyouinsertarechargeablebattery,itsvoltageisdisplayedfor3seconds.Thenthe
chargingcurrent(exfactorysetto75mA)isdisplayedfor3seconds.
• Ifyoudonotpressanybuttonduringthis6-secondperiod,chargingwillbegin.
• However,ifyoupressabuttonduringthis6-secondperiod,theproductwaitsfor10seconds
before applying the setting for the charger compartment.
• Oncetheprogramfortherstrechargeablebatteryhasbeenselected,youcaninsertthenext
rechargeable battery and set the desired program.
• Ifyoumakeyoursettingswhileseveraldisplaysareashing,thesettingsaresimultaneously
applied to all displays.
• Oncetheprogramisstarted,youcannolongeraltertheprogramandthechargingcurrent.To
changetheprogramorthechargingcurrent,removetherechargeablebatteriesandputthem
back in again or press and hold the MODE button for at least 2 seconds.
• Duringnormaloperation,ifyoupressDISPLAY,theactivedisplaysalternatelydisplaythe
various display units.
b) Function of the keys
Button Function
MODE Select mode/program
DISPLAY Switching between measured values
CURRENT Set charging current
SLOT Selectchargercompartment;conrmsetting
21