User manual

16. USB Output

If the charger is connected to the voltage/current supply, a voltage of 5 V/DC as common for USB and a current of up

to 2.1 A are available at the USB-output.

You can use this output, e.g. to charge a mobile phone or a tablet computer.

17. PC Software

First install the software (at least Windows XP or higher required) and the drivers of the enclosed CD before

connecting the charger to a computer.

For operation of the software observed, e.g., the corresponding information on the CD or in the software's

help function.

Observe that the software cannot use both charging/discharging channels at the same time. If you want

to control both channels at the same time by a computer, you need to use two computers (connect each

computer to one channel of the charger). This limitation may no longer apply if you have a newer software

version.

• Place the CD included in the delivery in the corresponding drive of your computer.

• Iftheinstallationprogrammedoesnotstartupautomatically,openthetableofcontentsoftheCD,e.g.withthele

manager of Windows and start the installation programme manually.

• Follow all instructions of the software or Windows.

• Now connect the USB socket of the charger of channel 1 or 2 to a free USB interface of your computer via a suitable

USB cable (not included).

Windows recognises the new hardware and completes the driver installation. Windows may then have to be re-

started.

• Start the software. If any problems occur, try starting the software with Administrator rights.

• The charger can be controlled by software now.

 Ifanewversionofthesoftwareisavailable,youcannditonwww.conrad.com in the download area on

the respective product website.