User manual

73
14. Loading/Changing/Saving Rechargeable Battery Data
The charger has a total of 6 memories in which you can save rechargeable battery data/settings. They can
be loaded again on demand. This way, frequently used rechargeable battery programmes with the associ-
ated rechargeable battery data can be loaded without having to tediously set them again.
The charger must be in the main menu.
Push the "PROGRAM" button to set up the memories.
In the delivery condition and after a reset, all memories are pre-
assigned (e.g. 2-cell LiPo battery), but can, of course, be changed
according to your wishes.
Select one of the 6 memories by pushing the corresponding key/
button as usual.
Use "EDIT" to change the data of your memory; see below.
Use the button "LOAD" to load the rechargeable battery data of
the memory. The charger will then jump right to the respective
rechargeable battery function where you can start the associated
rechargeable battery programme.
Use the button "BACK" to return to the main menu.
If you have selected "EDIT", you can now change the memory.
You can use the buttons to select the rechargeable battery type and
the cell number, charging procedure (depending on the recharge-
able battery type set), the charge current and discharge current.
Push the button "CONFIRM" to save the settings made.
The saved data are not lost if the charger is discon-
nected from the operating voltage.