User manual

44
3. Intended Use
The charger "V-Charge 120 Duo" has two charge/discharge channels independent of each other.
The charger is operated via a contact-sensitive colour display on which all required displays and operating elements
are shown.
The charger is used to charge and discharge rechargeable batteries of the type NiMH/NiCd (1 - 15 cells), LiPo/LiIon/LiFe
(1 - 6 cells) and lead acid batteries (1 - 10 cells, 2 V - 20 V).
The charging current can be set between 0.1 A und 12.0 A for each of the two channels. The maximum charging output
per channel is 120 W; the total charging output of the charger is 240 W.
The discharging current can be set between 0.1 A and 5.0 A for each of the two channels. The maximum discharging
output per channel is 10 W; the total discharging output of the charger is 20 W.
For each of the two charge/discharge channels, there is a connection for a temperature sensor available for battery
monitoring (not enclosed, can be ordered as an accessory).
For multi-cell lithium rechargeable batteries, each charge/discharge channel has a separate balancer. Two matching
balancer boards (with XH-connections) are enclosed.
The charger has an integrated mains unit to permit operation on mains voltage (switchable between 115 and
230 V/AC, 50/60 Hz). The charger may, however, also be alternatively operated on a stabilised direct voltage of
11 - 18 V/DC (e.g. via an external vehicle lead battery or a suitable mains adapter).
The safety notes and all other information in these operating instructions always have to be observed!
Read the operating instructions carefully and attentively, and keep them for later reference. Only pass the product on
to any third parties together with the operating instructions.
Use other than that described above can lead to damage to the product and may involve additional risks such as, for
example,shortcircuits,re,electricalshocketc.Theentireproductmustnotbemodiedorconverted,andthecasing
must not be opened!
This product complies with the statutory national and European requirements.
4. Scope of Delivery
• Multifunctional charger
• 2x XH adapter (balancer board)
• Mains cable
• Software CD
• Operating instructions
Current operating instructions
Download the current operating instructions via the link www.conrad.com/downloads or scan the
QR code displayed. Observe the instructions on the website.