User manual
68
c) General Information on Operation of the Menus
For an overview of the menu structure, see the next chapter.
• Select the desired submenu from the main menu using the "ESC/MODE/STOP" or the "DEC" button as described
and conrm your selection with the button "START/ENTER".
• Using the buttons "INC" and "DEC", the various conguration options are called up.
• To modify a value, push the "START/ENTER" button - the display then ashes.
• Modify the value shown in the display using the "INC" and "DEC" buttons. For quick adjustment of a value (e.g.
the charging current), keep the respective button pushed for a longer time.
• Save the (modied) value with the "START/ENTER" button.
• Exit each setting menu using the "ESC/MODE/STOP" button. The charger then returns to the main menu.
Various information is indicated on the display during a charge/discharge process by repeatedly pressing the
button "DEC". If you do not push any button for a few seconds, the charger will return to the normal display.
If a lithium rechargeable battery with balancer plug is connected to the charger (or via the balancer board),
you can switch to the display of the individual cell voltages during charging/discharging by pushing the button
"INC". Briey push the button "START/ENTER" for the charger to return to the normal display.