Manualshelf

User manual

ManualsBrandsVOLTCRAFT ManualsModel Making Charger SystemsScale model multifunction charger 12 V, 230 V 20 A V-Charge 300 Touch NiMH, NiCd, LiPolymer, Li-ion, Lead-acid
61626364656667686970
70
8. OPERATING ELEMENTS
4
9
10
8
7
6
5
3
1
2
1 Fan #1 (temperature-controlled, starts up automatically when required)
2 Contact-sensitive colour display (touch screen)
3 Low-voltage device socket for connecting the charger to the mains voltage
4 Socket for external temperature sensor (not enclosed, can be ordered separately)
5 Balancer connection (for rechargeable battery or external balancer board)
6 Round sockets (4 mm) for rechargeable battery connection (red = plus/+, black = minus/-)
7 USB port to connect to a PC
8 USB power output (5 V/DC, 2.1 A) to charge, e.g., Smartphones or similar
9 Direct voltage input (11 - 18 V/DC, stabilised), e.g. to connect to an external vehicle lead
battery
Operate the charger either via the mains voltage (3) or via the direct voltage input
(9). Never use both inputs at the same time. This may damage the charger.
10 Fans #2 and #3 (temperature-controlled, start up automatically when required)