User manual

• When the number of recognition processes for the delta-U charging procedure is to be

changed,brieypushthebutton"START/ENTER".Thenumberashes.

• Usethebuttons"INC"and"DEC"tosetthenumberofrecognitionprocess.

• Brieypushthe"START/ENTER"buttontoconrmthesetting.Thedisplaystopsashing.

• Start the rechargeable battery programme "RE-PEAK" by pushing the button "START/

ENTER" for 3 seconds.

If the settings are wrong, or if the charger detects a problem, a warning signal is emit-

ted and the appropriate information is shown in the display. You can stop the warning

signal by pressing the "BATT. TYPE/STOP" button. The charger then returns to the

previouscongurationmenu.

The display shows, e.g., the following data while charging:

The rechargeable battery type is shown in the upper

left ("NiMH" = NiMH rechargeable battery), the upper

middle shows the charging current and the upper right

the current rechargeable battery voltage.

The lower left shows the current rechargeable battery programme ("RPC" = "RE-PEAK"), the

middle the elapsed charging time and the charged capacity in mAh is displayed to the right of

this.

• Oncethechargingprocesshasbeencompleted,anaudiosignalisemitted(ifitwasnotturned

off).

If you wish to cancel the charging process, push the "BATT. TYPE/STOP" button.

NiMH 0.2A 9.59V

RPC 000:33 00017